Alabama-Tennessee Natural Gas Company

Second Revised Volume No. 1

 Contents / Previous / Next / Main Tariff Index



Effective Date: 09/01/1993, Docket: RS92- 27-003, Status: Effective

Original Sheet No. 107 Original Sheet No. 107 : Superseded





agreed, and such shall be installed, and volumes

calculated in accordance with generally accepted

industry practices.


(d) New Measurement Techniques - If at any time a new

method or technique is developed with respect to

gas measurement or the determination of the factors

used in such gas measurement, such new method or

technique may be substituted.


4.2 Check measuring equipment: Transporter and Shipper may

install, maintain, and operate, at its own expense, such

check measuring equipment as desired, provided that such

equipment be installed on its own facilities so as not to

interfere with the operation of either Party's measuring

equipment at or near the Point of Delivery.


4.3 Right to be present: Transporter and Shipper have the

right to have representatives present at the time of any

installing, reading, cleaning, changing, repairing,

inspecting, testing, calibrating, or adjusting done in

connection with the other's measuring equipment used in

measuring or checking the measurement of deliveries of

gas under the executed Service Contract. The records

from such measuring equipment shall remain the property

of their owner, but upon request each will submit to the

other its records and charts together with calculation

therefrom, for inspection and verification, subject to

return within ten (10) days after receipt thereof.


4.4 Care required: All installations of measuring equipment

applying to or affecting deliveries of gas shall be made

in such manner as to permit an accurate determination of

the quantity of gas delivered and ready verification of

the accuracy of measurement. Care shall be exercised by

Transporter and Shipper in the installation, maintenance

and operation of pressure regulating equipment so as to

prevent any inaccuracy in the determination of the volume

of gas delivered by Transporter to Shipper.


4.5 Calibration and test of meters: The accuracy of

Transporter's measuring equipment shall be verified at

reasonable intervals, and if requested, in the presence

of representatives of Shipper or Transporter, but neither

party shall be required to verify the accuracy of

equipment more frequently than once in any thirty (30)

day period. In the event either party shall notify the