T.W. Phillips Pipeline Corp.

Original Volume No. 1

 Contents / Previous / Next / Main Tariff Index



Effective Date: 01/01/2010, Docket: RP10-141-000, Status: Effective

Original Sheet No. 27 Original Sheet No. 27





1.12. “Discounted Rate” means a rate or rate formula for service under any RateSche-

dule contained in this Tariff established pursuant to Section 16 of the GT&C.


1.13. “FT Agreement” means an agreement pursuant to Rate Schedule FT.


1.14. “Force Majeure” has the meaning specified in Section 27 of the GT&C.


1.15. “Fuel and Gas Loss” means Gas consumed in pipeline operations, including fuel,

operational use, and losses.


1.16. “Gas” means methane and such other hydrocarbon constituents, or a mixture of two

or more of them which, in any case, meets the quality specifications of the



1.17. “GT&C” means the General Terms and Conditions of this FERC Gas Tariff.


1.20. “Gross Calorific Heating Value” means the quantity of heat expressed in Btus

produced by the complete combustion at constant pressure of one anhydrous (dry)

cubic foot of Gas with air at a temperature of sixty degrees (60°) Fahrenheit and

at a pressure of 14.73 psia, when the products of the combustion are cooled to

the initial temperature of the Gas and air and the water formed by combustion is

condensed to the liquid state.


1.21. “Imbalance” has the meaning specified in Section 13 of the GT&C.


1.22. “Initial Facilities” means the facilities authorized to be constructed and

operated in the first certificate of public convenience and necessity issued by

the Commission.


1.23. “IT Agreement” means an agreement pursuant to Rate Schedule IT.


1.24. “Intra-day Nomination” is a nomination submitted after the nomination deadline

whose effective time is as stated in Section 8 of the GT&C.


1.25. “MDQ” means the Maximum Daily Quantity.


1.26. “MMBtu”, “Dekatherm” or “Dth”, means one million (1,000,000) British Thermal

Units (“Btu”) and shall be the standard unit for purposes of nominations,

scheduling, invoicing, and balancing. Allocated quantities and imbalances shall

be expressed in the same units as nominated quantities.