ANR Storage Company

Original Volume No. 1

 Contents / Previous / Next / Main Tariff Index



Effective Date: 11/01/2007, Docket: RP08- 16-000, Status: Effective

First Revised Sheet No. 138 First Revised Sheet No. 138 : Effective

Superseding: Original Sheet No. 138






(6) The compressibility ratio factor "s" used in

computing the volume of Gas delivered through a

turbine meter or a positive displacement meter

shall be determined by the equation s = (Fpv)2, in

which "Fpv" is the supercompressibility factor

determined as described in subparagraph (4) of

this subsection (b), above.


(7) In determining the flowing temperature factor,

supercompressibility factor, and compressibility

ratio factor "s" for use in computing the volume

of Gas delivered through a meter, the flowing Gas

temperature for only the period(s) of time that

Gas was flowing through the meter shall be used.


6.3 All flow, measuring, testing and related equipment shall

be of standard manufacture and type approved by Seller.

If applicable, Seller or Customer may install check

measuring equipment, provided that such equipment shall

be so installed as not to interfere with the operations

of the Operator. Seller, or Customer, in the presence

of the other party, shall have access to measuring

equipment at all reasonable times, but the reading,

calibrating, and adjusting thereof and the changing of

charts, if any, shall be done by the Operator. Seller

or Customer shall have the right to be present at the

time of the installing, reading, cleaning, changing,

repairing, inspecting, testing, calibrating or adjusting

done by the Operator of the measuring equipment. The

records from such measuring equipment shall remain the

property of the Operator, but upon request, the other

party may request records, including charts, if any,

together with calculations therefrom for inspection,

subject to return within thirty (30) Days after receipt

thereof. Reasonable care shall be exercised in the

installation, maintenance and operation of the measuring

equipment so as to avoid any inaccuracy in the

determination of the volume of Gas injected and

withdrawn. The accuracy of all measuring equipment

shall be verified by Operator at reasonable intervals,

and if requested, in the presence of representatives of

the other party, but neither Seller nor Customer shall

be required to verify the accuracy of such equipment

more frequently than once in any thirty (30) Day period.


If either party at any time desires a special test of

any measuring equipment, it will promptly notify the

other party