Markwest New Mexico, L. L. C.
Second Revised Volume No. 1
Contents / Previous / Next / Main Tariff Index
Effective Date: 08/01/2008, Docket: RP08-409-000, Status: Effective
Original Sheet No. 109 Original Sheet No. 109 notification in writing. If gas delivered to the Delivery Point(s) fails to conform to the quality specifications, Shipper shall notify Transporter promptly of such deficiency and follow notification in writing. In both instances, the deficiency shall be remedied within a reasonable period of time. Neither Transporter nor Shipper shall be required to receive gas that fails to conform to the quality specifications.3. MEASUREMENT 3.1 Measurement Facilities Transporter, at its sole cost and expense, shall provide for the continued operation and maintenance of gas measuring facilities to be located at the Receipt Points and Delivery Points. Such facilities shall be constructed and gas volumes shall be measured by (1) orifice metering tubes at the Delivery Point(s) installed in compliance with the requirements prescribed in Gas Measurement/Committee Report No. 3 of the American Gas Association approved standards measurement, including the appendix thereto, and any subsequent revision thereof acceptable to Shipper and Transporter or their designees and (2) ultrasonic meters at the Receipt Point(s) installed in compliance with the requirements prescribed in Gas Measurement/Committee Report No. 9 of the American Gas Association approved standards measurement, including the appendix thereto, and any subsequent revision thereof acceptable to Shipper and Transporter or their designees. 3.2 Check Metering Equipment - Shipper shall have the right, at its sole option and expense, to install and operate check metering equipment downstream of the Receipt Points and the Delivery Points. 3.3 Gas Measurement and Equipment - Reading, calibration and adjustment of each party's meters and related equipment shall be performed solely by that party. Each party, however, shall provide the other with seven (7) Days prior written notice of all reading, calibration and adjustment, and representatives of the other party may be present for such events.