Sabine Pipe Line Company LLC
Second Revised Volume No. 1
Contents / Previous / Next / Main Tariff Index
Effective Date: 07/31/1993, Docket: RS92- 78-003, Status: Effective
Original Sheet No. 279 Original Sheet No. 279 : Superseded
14. METERING AND PIPELINE FACILITIES
14.1 Metering Facilities
Upon agreement with Sabine, either Sabine or an
interconnecting Operator may install, own, maintain and
operate metering facilities properly equipped with
orifice meters and other necessary measuring equipment
required to measure the quantities of gas received into
Sabine's System or delivered from Sabine's System.
Such metering facilities shall be located at or near
the Receipt or Delivery Point(s).
14.2 Check Meters
Either Sabine or the interconnecting Operator may, at
its option and expense, install and operate check
meter(s) to check the other party's meters.
14.3 Access to Metering Facilities
Either Sabine or the interconnecting Operator shall, at
all reasonable times, have access to the other party's
metering and regulating facilities for inspection and
checking, but the reading, calibration and adjustment
thereof shall be done only by the operator of such
metering and regulating facilities.
14.4 Calibration and Testing
At least once each month, either Sabine or the
interconnecting Operator will calibrate its meters and
measuring equipment and if so requested, in the
presence of representatives of the other party, and the
parties shall jointly observe any adjustments which are
made to the meters or measuring equipment, should such
adjustments be necessary. Likewise, any calibration
and adjustment of the other party's check meters shall
be jointly observed by representatives of both parties.
Each party shall give to the other party notice of the
time of all tests of meters at least five (5) days in
advance of the holding of the test so that the other
party may conveniently have its representatives
present. If the required notice