Midwestern Gas Transmission Company
Third Revised Volume No. 1
Contents / Previous / Next / Main Tariff Index
Effective Date: 01/01/2002, Docket: RP02- 72-000, Status: Effective
Original Sheet No. 231 Original Sheet No. 231 : Effective
GENERAL TERMS AND CONDITIONS
4. MEASURING EQUIPMENT (Continued)
4.1 Company's Measuring Equipment (Continued)
4.1.2 Positive Displacement Meters
Diaphragm or rotary meters, if used shall be installed, and gas
quantities computed, in accordance with generally accepted industry
4.1.3 Turbine Meters
Turbine meters, if used, shall be installed, and gas quantities
computed, in accordance with American Gas Association report 7, dated
November, 1984 and any modifications and amendments thereof.
4.1.4 Electronic Flow Computers
Electronic or other types of flow computers if used, shall be
installed, and gas quantities calculated in accordance with generally
accepted industry practices.
4.1.5 New Measurement Techniques
If, at any time, a new method or technique is developed with respect to
gas measurement or the determination of the factors used in such gas
measurement, such new method or technique may be substituted upon
mutual agreement thereto by the parties.
4.2 Check Measuring Equipment
Check measuring equipment shall be limited to one Company, one Shipper and one
Balancing Party where each may install, maintain and operate, at its own
expense, such check measuring equipment as desired, provided that such
equipment shall be so installed as not to interfere with the operation of the
primary measuring equipment or the operation of the facility or the other
party's measuring equipment.
4.3 Right to be Present
Company, Shipper, or Balancing Party shall have the right to have
representatives present at the time of any installing, reading, cleaning,
changing, repairing, inspecting, testing, calibrating, or adjusting done in
connection with the other's measuring equipment used in measuring or checking
the measurement of deliveries of gas under the transportation contract. The
records from such measuring equipment shall remain the property of their owner,
but, upon request, each will submit to the other its record, together with
calculations therefore, for inspection and verification, subject to return
within ten days after receipt thereof.