Guardian Pipeline, L.L.C.

Original Volume No. 1

 Contents / Previous / Next / Main Tariff Index



Effective Date: 12/01/2002, Docket: RP02-534-000, Status: Effective

Original Sheet No. 119 Original Sheet No. 119 : Superseded










(d) Use of ultrasonic measurement equipment, to the

extent Transporter employs ultrasonic metering

devices, will conform to recommendations for the

design and installation of such equipment

contained in AGA Report No. 9, as published in

1998 and as such report may hereafter be further

revised or as may be mutually agreed upon by

Connecting Party and Transporter.


5.3 Access to Equipment and Records


Transporter and Connecting Party shall have the right

to be present at the time of any installing, reading,

cleaning, changing, repairing, inspecting, testing,

calibrating, or adjusting done in connection with the

other's equipment used in measuring receipts and

deliveries hereunder. The records from such

measurement equipment shall remain the property of

their owner, but upon request each will submit to the

other its records and charts, together with

calculations therefrom, for inspection and

verification, subject to return within thirty (30)

days after receipt thereof.


5.4 Check Measurement Equipment


Connecting Party may install, operate, and maintain,

at its own expense, such check measurement equipment

as it shall desire, provided, however, that such

equipment shall be so installed immediately upstream

of the Point(s) of Receipt or immediately downstream

of the Point(s) of Delivery so as not to interfere

with the operation of other, including Transporter's,

measurement equipment or to increase any risk of

damage to Transporter's Pipeline Facilities or of

injury to any person. Transporter shall have access to

such check measurement equipment at all reasonable

hours, but the reading, calibrating, and adjusting

thereof and the changing of charts shall be done only

by Connecting Party.