Great Lakes Gas Transport, L.L.C.
Second Revised Volume No. 1
Contents / Previous / Next / Main Tariff Index
Effective Date: 06/01/1997, Docket: RP97-157-006, Status: Effective
Sub. First Revised Sheet No. 196 Sub. First Revised Sheet No. 196 : Effective
(F) Operator shall, at its own cost and expense (i) obtain, provide
Transporter with, and maintain any easement(s) or other land interest(s) which,
in Transporter's judgment as to type and extent, are reasonably necessary for the
installation, operation, and maintenance of receipt and related facilities; and
(ii) provide Transporter with a copy of the recorded instruments evidencing such
land interests and Transporter's beneficial interest therein.
(G) Measurement and other equipment shall be installed, at Operator's
expense, at each Exhibit A Receipt Point facility, which, in Transporter's
reasonable judgment, may be necessary to accommodate the deliveries of gas
received and projected to be received by it at the Receipt Points (the "Receipt
Facilities"). The normal operation, calibration, maintenance, adjustment, and
repair of the Receipt Facilities shall be performed by Transporter at its initial
expense; provided, however, that Operator shall maintain and calibrate any of the
Exhibit A Receipt Points which deliver less than three hundred (300) Dth per
month. Modifications to Receipt Facilities resulting from changes in Operator's
operations shall be performed at Operator's cost and expense.
(H) Operator shall, at its own cost and expense, provide, operate, and
maintain in safe and efficient operating condition such regulators, relief valves,
and other equipment as may be necessary in Transporter's reasonable judgment to
avoid excessive pressures (and the risk of such pressures) in facilities owned and
operated by Transporter or its customers.
(A) Operator (or its designee) shall respond promptly to requests for
confirmation of shipper nominations. Operator acknowledges that Transporter is
under no obligation to schedule unconfirmed nominations.
(B) Operator shall, at its own cost and expense, deliver to Transporter
all charts, manual meter readings or electronic flow information on or before the
second business day following the identified production period.