Enbridge Pipelines (AlaTenn) L. L. C.

FOURTH REVISED VOLUME NO. 1

 Contents / Previous / Next / Main Tariff Index

 

 

Effective Date: 10/11/2002, Docket: RP03- 40-000, Status: Effective

Original Sheet No. 151 Original Sheet No. 151 : Effective

 

GENERAL TERMS AND CONDITIONS (continued)

 

Transporter shall comply with the Communications of the

Releasing Shipper. Provided, however, that the same

Communications, in Transporter's sole opinion, must not be

inconsistent with Transporter's Tariff or the terms of

either the Releasing Shipper's or Replacement Shipper's

Service Contract. The Releasing Shipper shall indemnify

Transporter against any claim or suit by the Replacement

Shipper, its successors or assigns, arising from any action

taken by Transporter in reliance upon the Releasing

Shipper's Communications, and shall hold Transporter

harmless for any action taken by Transporter in reliance

upon the Communications of the Replacement Shipper. The

Replacement Shipper shall indemnify Transporter against any

claim or suit of any kind by the Releasing Shipper, its

successors or assigns, arising from any action taken by

Transporter in reliance upon the Communications of the

Replacement Shipper and shall hold Transporter harmless for

any actions taken by Transporter in reliance upon the

Communications of the Releasing Shipper.

 

4. MEASURING EQUIPMENT

 

4.1 Measuring station: With respect to gas received or delivered

under a Transportation Contract, unless otherwise agreed upon, all

measuring facilities shall be installed, if necessary, owned,

maintained and operated by Transporter or Transporter's designee

near the Receipt and Delivery Point(s).

 

(a) Orifice meters, if used, shall be installed and operated,

and gas quantities computed in accordance with the current

published recommendations of the American Gas Association or

as mutually agreed upon by Transporter and Shipper.

 

(b) Diaphragm or Turbine Meters, if used, shall be installed,

and gas volumes computed, in accordance with generally

accepted industry practices.

 

(c) Electronic Flow Computers or other types of flow computers

are required, unless otherwise mutually