K N Interstate Gas Transmission Co.
Second Revised Volume No. 1-B
Contents / Previous / Next / Main Tariff Index
Effective Date: 11/01/1994, Docket: RP94-397-000, Status: Effective
First Revised Sheet No. 16 First Revised Sheet No. 16 : Superseded
Superseding: Original Sheet No. 16
GENERAL TERMS AND CONDITIONS FOR SERVICES - continued
5.5 The heating value of the gas delivered shall be determined by
approved recording calorimeters, chromatographs, continuous
samplers, or other instruments, installed by Transporter at points
on Transporter's pipeline system.
6. MEASURING EQUIPMENT
6.1 Transporter and Shipper shall agree regarding arrangements for
installation, ownership, operation and maintenance at or near
Points of Receipt and Points of Delivery of measuring equipment,
including heating value measuring equipment and telemetering
equipment, which shall meet the qualifications set out in the
General Terms and Conditions of Transporter's FERC Gas Tariff.
6.2 If Shipper installs, maintains, or operates measuring equipment,
such actions shall be pursuant to the specifications set forth in
the General Terms and Conditions of Transporter's FERC Gas Tariff.
Transporter shall not be obligated to install such measuring
6.3 Shipper may install, operate and maintain, at its own expense, such
check measuring equipment as it shall desire, provided that such
check meters and equipment shall be so installed as not to
interfere with the operation of Transporter's meters at or near the
Point of Delivery. Transporter shall have access to such check
measuring equipment at all reasonable hours but the reading,
calibrating and adjusting thereof and changing of charts shall be
done only by Shipper.
6.4 Both Transporter and Shipper shall have the right to be represented
at any installing, reading, cleaning, changing, repairing,
inspecting, calibrating or adjusting done in connection with the
other's measuring equipment installed hereunder. The records from
such measuring equipment shall remain the property of the owner but
the owner upon request will submit to the other such records and
charts, together with calculations therefrom, for its inspection
and verification, subject to return within ten (10) days after