K N Interstate Gas Transmission Co.

Third Revised Volume No. 1-B

 Contents / Previous / Next / Main Tariff Index

 

 

Effective Date: 08/01/1996, Docket: RP96-296-000, Status: Effective

Original Sheet No. 16 Original Sheet No. 16 : Superseded

 

GENERAL TERMS AND CONDITIONS FOR SERVICES - continued

 

5.4 The components for determining the deviation from

Boyle's Law, at the pressure and temperature under

which delivered, shall be determined by tests at

intervals of twelve (12) months or at such shorter

interval as is found necessary in practice and the

correction factor so determined using American Gas

Association "Report Number Eight" or American Gas

Association "Project NX-19" shall be used in the

computation of deliveries until the next test.

 

5.5 The heating value of the gas delivered shall be

determined by approved recording calorimeters,

chromatographs, continuous samplers, or other

instruments, installed by Transporter at points on

Transporter's pipeline system.

 

6. MEASURING EQUIPMENT

 

6.1 Transporter and Shipper shall agree regarding

arrangements for installation, ownership, operation and

maintenance at or near Points of Receipt and Points of

Delivery of measuring equipment, including heating

value measuring equipment and telemetering equipment,

which shall meet the qualifications set out in the

General Terms and Conditions of Transporter's FERC Gas

Tariff.

 

6.2 If Shipper installs, maintains, or operates measuring

equipment, such actions shall be pursuant to the

specifications set forth in the General Terms and

Conditions of Transporter's FERC Gas Tariff.

Transporter shall not be obligated to install such

measuring equipment.

 

6.3 Shipper may install, operate and maintain, at its own

expense, such check measuring equipment as it shall

desire, provided that such check meters and equipment

shall be so installed as not to interfere with the

operation of Transporter's meters at or near the Point

of Delivery. Transporter shall have access to such

check measuring equipment at all reasonable hours but

the reading, calibrating and adjusting thereof and

changing of charts shall be done only by Shipper.