K N Interstate Gas Transmission Co.

First Revised Volume No. 1-D

Effective Date: 12/02/1994, Docket: RP95- 35-000, Status: Effective

Original Sheet No. 15 Original Sheet No. 15 : Superseded

GENERAL TERMS AND CONDITIONS FOR SERVICES - continued

5.4 The components for determining the deviation from Boyle's Law,

at the pressure and temperature under which delivered, shall be

determined by tests at intervals of twelve (12) months or at

such shorter interval as is found necessary in practice and the

correction factor so determined using American Gas Association

"Report Number Eight" or American Gas Association "Project

NX-19" shall be used in the computation of deliveries until the

next test.

5.5 The heating value of the gas delivered shall be determined by

approved recording calorimeters, chromatographs, continuous

samplers, or other instruments, installed by Transporter at

points on Transporter's pipeline system.

6. MEASURING EQUIPMENT

6.1 Transporter and Shipper shall agree regarding arrangements for

installation, ownership, operation and maintenance at or near

Points of Receipt and Points of Delivery of measuring equipment,

including heating value measuring equipment and telemetering

equipment, which shall meet the qualifications set out in the

General Terms and Conditions of Transporter's Buffalo Wallow

FERC Gas Tariff.

6.2 If Shipper installs, maintains, or operates measuring equipment,

such actions shall be pursuant to the specifications set forth

in the General Terms and Conditions of Transporter's Buffalo

Wallow FERC Gas Tariff. Transporter shall not be obligated to

install such measuring equipment.

6.3 Shipper may install, operate and maintain, at its own expense,

such check measuring equipment as it shall desire, provided that

such check meters and equipment shall be so installed as not to

interfere with the operation of Transporter's meters at or near

the Point of Delivery. Transporter shall have access to such

check measuring equipment at all reasonable hours but the

reading, calibrating, and adjusting thereof and changing of

charts shall be done only by Shipper.