Alabama-Tennessee Natural Gas Company

Second Revised Volume No. 1

 Contents / Previous / Next / Main Tariff Index

 

 

Effective Date: 09/01/1993, Docket: RS92- 27-003, Status: Effective

Original Sheet No. 106 Original Sheet No. 106 : Superseded

 

GENERAL TERMS AND CONDITIONS (continued)

 

Transporter shall comply with the

Communications of the Releasing Shipper.

Provided, however, that the same

Communications, in Transporter's sole opinion,

must not be inconsistent with Transporter's

Tariff or the terms of either the Releasing

Shipper's or Replacement Shipper's Service

Contract. The Releasing Shipper shall

indemnify Transporter against any claim or

suit by the Replacement Shipper, its

successors or assigns, arising from

any action taken by Transporter in reliance

upon the Releasing Shipper's Communications,

and shall hold Transporter harmless for any

action taken by Transporter in reliance upon

the Communications of the Replacement Shipper.

The Replacement Shipper shall indemnify

Transporter against any claim or suit of any

kind by the Releasing Shipper, its successors

or assigns, arising from any action taken by

Transporter in reliance upon the

Communications of the Replacement Shipper and

shall hold Transporter harmless for any

actions taken by Transporter in reliance upon

the Communications of the Releasing Shipper.

 

4. MEASURING EQUIPMENT

 

4.1 Measuring station: With respect to gas received or

delivered under a Transportation Contract, unless

otherwise agreed upon, all measuring facilities shall be

installed, if necessary, owned, maintained and operated

by Transporter or Transporter's designee near the Receipt

and Delivery Point(s).

 

(a) Orifice meters, if used, shall be installed and

operated, and gas quantities computed in accordance

with the current published recommendations of the

American Gas Association or as mutually agreed upon

by Transporter and Shipper.

 

(b) Diaphragm or Turbine Meters, if used, shall be

installed, and gas volumes computed, in accordance

with generally accepted industry practices.

 

(c) Electronic Flow Computers or other types of flow

computers are required, unless otherwise mutually