Pinnacle Pipeline Company

ORIGINAL VOLUME NO. 1

 Contents / Previous / Next / Main Tariff Index

Effective Date: 10/08/2003, Docket: RP04-102-001, Status: Effective

Original Sheet No. 109 Original Sheet No. 109 : Effective

promptly of such deficiency and follow

notification in writing. If gas delivered to the

Delivery Point(s) fails to conform to the quality

specifications, Shipper shall notify Transporter

promptly of such deficiency and follow

notification in writing. In both instances, the

deficiency shall be remedied within a reasonable

period of time. Neither Transporter nor Shipper

shall be required to receive gas that fails to

conform to the quality specifications.

3. MEASUREMENT

3.1 Measurement Facilities

Transporter, at its sole cost and expense, shall

provide for the continued operation and

maintenance of gas measuring facilities to be

located at the Receipt Point and Delivery Points.

Such facilities shall be constructed and gas

volumes shall be measured by (1) orifice metering

tubes at the Delivery Point(s) installed in

compliance with the requirements prescribed in

Gas Measurement/Committee Report No. 3 of the

American Gas Association approved standards

measurement, including the appendix thereto, and

any subsequent revision thereof acceptable to

Shipper and Transporter or their designees and

(2) ultrasonic meters at the Receipt Point

installed in compliance with the requirements

prescribed in Gas Measurement/Committee Report

No. 9 of the American Gas Association approved

standards measurement, including the appendix

thereto, and any subsequent revision thereof

acceptable to Shipper and Transporter or their

designees.

3.2 Check Metering Equipment - Shipper shall have the

right, at its sole option and expense, to install

and operate check metering equipment downstream

of the Receipt Point and the Delivery Points.

3.3 Gas Measurement and Equipment - Reading,

calibration and adjustment of each party's meters

and related equipment shall be performed solely

by that party. Each party, however, shall

provide the other with seven (7) Days prior

written notice of all reading, calibration and