Transwestern Pipeline Company

Second Revised Volume No. 1

Effective Date: 02/01/1993, Docket: RS92- 87-003, Status: Effective

1st Revised Sheet No. 59 1st Revised Sheet No. 59 : Effective

Superseding: Original Sheet No. 59

GENERAL TERMS AND CONDITIONS

(continued)

5.2 Check Measuring Equipment

At any interconnect point, Non-Measurer may install, maintain and

operate at its own expense, such pressure regulators and/or check

measuring equipment as it shall desire, provided that such equipment

shall be so installed as not to interfere with the operation of

Measurer's measuring equipment at or near the point of receipt or

delivery. Measurer shall have access to such check measuring

equipment at all reasonable hours, but the reading, calibrating and

adjusting thereof and the changing of charts shall be done only by

Non-Measurer.

5.3 Access to Equipment and Records

Each party shall have the right to be present at the time of any

installing, reading, cleaning, changing, repairing, inspecting,

testing, calibrating, or adjusting done in connection with the

other's measuring equipment used in measuring receipts or deliveries

hereunder. The records from such measuring equipment shall remain

the property of their owner, but upon request each will allow the

other to inspect, upon reasonable notice, its records and charts, or

copies thereof, together with calculations therefrom.

5.4 Care Required

All installations of measuring equipment, applying to or affecting

receipts or deliveries hereunder, shall be made in such manner as to

permit an accurate determination of the quantity of