Overthrust Pipeline Company
First Revised Volume No. 1-A
Contents / Previous / Next / Main Tariff Index
Effective Date: 08/01/1999, Docket: RP99-339-001, Status: Effective
Sub Fourth Revised Sheet No. 60 Sub Fourth Revised Sheet No. 60 : Superseded
Superseding: Third Revised Sheet No. 60
GENERAL TERMS AND CONDITIONS
or more existing receipt or delivery points or (2) request
and pay for additional primary capacity.
12.3 Flexible use of alternate receipt and delivery
points. A firm Shipper, or any replacement Shipper, may
flex to or use any receipt or delivery point on an alternate
basis at which capacity is available. However, a replacement
Shipper may not add or delete primary receipt and delivery
points or change Shipper's RDC at primary receipt and
delivery points unless the terms of Shipper's release allow
12.4 Priority at alternate receipt and delivery points.
A Shipper's priority at alternate points shall be determined
according to 11.
12.5 Nominations to and rights of firm and replacement
Shippers at alternate points. A firm or replacement Shipper
must follow Overthrust's nomination procedures to flex to
alternate receipt and delivery points. A firm or
replacement Shipper's right to service at alternate receipt
and delivery points shall be subordinate to the primary
rights of other firm Shippers at those points, but as
provided by 11 to this tariff, will have priority over
interruptible transportation and authorized overrun service.
12.6 Right of Shippers to renominate if bumped. If a
firm Shipper or replacement Shipper's nomination at a
receipt or delivery point requires bumping of a Shipper
currently using that receipt or delivery point, Overthrust
will notify the interrupted Shipper and allow that shipper
to nominate the requested transportation volumes at another
receipt or delivery point subject to the intra-day
nomination procedures set forth in Section 15.2 of these
General Terms and Conditions.
12.7 Availability of receipt and delivery point
information. Replacement Shippers may obtain information
through Questline regarding Overthrust's ability to provide
transportation service between the receipt and delivery
points desired by the replacement Shipper.
13.1 Unit of Measurement and Metering Base. The
standard reporting basis for Btu is 14.73 psia, 60
degrees F (101.325 kPa, and 15 degrees C, and dry).