Texas Eastern Transmission Corporation

Sixth Revised Volume No. 1

Effective Date: 06/01/1993, Docket: RS92- 11-009, Status: Effective

Original Sheet No. 524 Original Sheet No. 524 : Effective

GENERAL TERMS AND CONDITIONS

(Continued)

7.10 Flow Control

The Pipeline shall control flow of gas into and out of its facilities at all

measurement facilities, but may allow the following if all of Pipeline's

operating standards and requirements are met: (a) Pipeline may allow third

parties to control flow into the Pipeline's facilities, and (b) Pipeline may

allow third parties to control flow out of the Pipeline's facilities, but

reserves the right to override the third party's flow control equipment.

7.11 Maintenance

(A) Major Maintenance

Major Maintenance shall include, but not be limited to, the repair

or replacement of major components and equipment required to

support the Measurement Operations. For measurement facilities

which Customer or third party owns and for which Pipeline performs

Measurement Operations, such Customer or third party shall be

responsible for any and all associated costs of such Major

Maintenance unless otherwise agreed by Pipeline and Customer or

third party.

(B) Routine Maintenance

Routine Maintenance shall be the normal day to day maintenance

required to support the Measurement Operations or necessary to

upkeep the measurement facility and shall include, but not be

limited to, replacement of minor replacement parts for

instrumentation, measurement equipment (including the RTU) and

minor valves and piping. The entity (Pipeline, Customer or third

party) which performs the Measurement Operations for the

measurement facility shall also be responsible for such Routine

Maintenance and any and all associated costs of such Routine

Maintenance unless otherwise agreed by Pipeline and Customer or

third party.