K N Wattenberg Transmission LLC
Original Volume No. 1
Contents / Previous / Next / Main Tariff Index
Effective Date: 04/01/1993, Docket: CP92-203-002, Status: Effective
Original Sheet No. 49 Original Sheet No. 49 : Effective
General Terms and Conditions - continued
b. Shipper may install, operate and maintain, at its own
expense, check measuring equipment as it shall desire,
provided that check meters and equipment shall be
installed as not to interfere with the operation of
Transporter's meters at or near the Point of Delivery.
Transporter shall have access to check measuring equipment
at all reasonable hours but the reading, calibrating and
adjusting thereof and changing of charts shall be done
only by Shipper.
c. Both Transporter and Shipper shall have the right to be
represented at any installing, reading, cleaning,
changing, repairing, inspecting, calibrating or adjusting
done in connection with the other's measuring equipment
installed hereunder. The records from such measuring
equipment shall remain the property of the owner but the
owner upon request of the other will submit records and
charts, together with calculations therefrom, for its
inspection and verification, subject to return within ten
(10) days after receipt.
6. METER TESTS AND ADJUSTMENTS.
a. Transporter shall test its meters at reasonable intervals
in the presence of Shipper's representatives, if Shipper
so elects. Shipper at its sole expense may have tests or
calibrations of Transporter's meters made at reasonable
times in the presence of Transporter's representatives.
(1) If, upon any test, measuring equipment is found to be
not more than two (2) percent fast or slow, previous
readings of such equipment shall be considered
correct in computing deliveries of gas; the equipment
shall be properly adjusted at once to record