Cameron Interstate Pipeline, LLC

Original Volume No. 1

Effective Date: 11/01/2008, Docket: RP08-647-000, Status: Effective

Original Sheet No. 143 Original Sheet No. 143

GENERAL TERMS AND CONDITIONS

(continued)

time since the date of the last test, but not exceeding

a correction period of sixteen (16) Gas Days where

orifice measurement equipment is used in the computation

of quantity and not exceeding forty-five (45) Gas Days

where other measurement equipment is used; and

corrected with accuracy, the quantity of gas shall be

estimated:

(i) By using the registration of any existing and

agreed upon check equipment considered by parties

concerned to be registering accurately, or in the

absence of such facilities,

(ii) By correcting the error, if the quantity or

percentage of error is ascertainable by

calibration, test, or mathematical calculation,

or if neither of the two foregoing procedures are

applicable,

(iii) By relating the quantity of receipt or delivery

to receipts or deliveries during periods under

similar conditions when the measurement equipment

was deemed to have been registering accurately.

16.7 Preservation of Records. Each party shall preserve for a period of

at least two (2) years all test data, charts and other similar

records or such longer period as may be required by any duly

constituted authority having jurisdiction.

16.8 Flow Control. The Pipeline shall control flow of gas into and out

of its facilities at all measurement facilities, but may allow the

following if all of Pipeline's operating standards and requirements

are met: (a) Pipeline may allow third parties to control flow into

the Pipeline's facilities, but reserves the right to override the

third party's flow control equipment, and (b) Pipeline may allow

third parties to control flow out of the Pipeline's facilities, but

reserves the right to override the third party's flow control

equipment.