Enbridge Offshore Pipelines (Utos) LLC

FIFTH REVISED VOLUME NO. 1

 Contents / Previous / Next / Main Tariff Index

Effective Date: 08/01/2009, Docket: RP09-815-000, Status: Effective

First Revised Sheet No. 112 First Revised Sheet No. 112

Superseding: Original Sheet No. 112

GENERAL TERMS AND CONDITIONS

(Continued)

3.7 Measuring Equipment. Unless otherwise agreed upon, Shipper

will cause to be provided, maintained, and operated

necessary offshore platforms and measuring and regulating

stations equipped with flow meters, continuous Gas samplers

and other necessary measuring equipment by which its volumes

of Gas delivered to UTOS hereunder shall be determined.

Unless otherwise agreed upon, UTOS shall cause to be

installed, operated and maintained at its expense a

measuring and regulating station or stations equipped with

flow meters, Gas analyzer and other necessary measuring

equipment for the measurement of Gas redelivered to or for

the account of Shipper; such measuring and regulating

stations shall be so installed at the northern terminus of

the System or one shall be installed at the mutually

agreeable points onshore in the vicinity of Johnson's Bayou,

Louisiana to provide measurement on a compatible basis. All

flow, measuring, testing, and related equipment shall be of

standard manufacture and type approved by UTOS, and the

size, type, and specifications of such equipment shall also

be approved by UTOS before same is fabricated and

installed. In the event Shipper fails to comply with UTOS'

measurement standards for installation and or operation and

maintenance of such facilities, as described in Sections

3.6, 3.7 and 6.1, UTOS reserves its right to suspend service

for non compliance at any time during the term of the

agreement, to preserve the control, operation and accurate

Gas measurement on its system. Either of the Parties may

install check measuring equipment, provided that such

equipment shall be so installed as not to interfere with the

operation of the other. Shipper and UTOS, in the presence

of each other, shall have access to all measuring equipment

at all reasonable times, but the reading, calibrating, and

adjusting thereof shall be done by the owner, unless

otherwise agreed upon. Shipper and UTOS shall have the

right to be present at the time of any installing, reading,

cleaning, changing, repairing, inspecting, testing,

calibrating, or adjusting done in connection with all

measuring equipment. The records from such measuring

equipment shall remain the property of their owner, but upon

request, either Party will cause to be submitted to the

other records together with calculations therefrom, for

inspection, subject to return within 30 Days after receipt

thereof. Reasonable care shall be exercised in the

installation, maintenance, and operation of measuring

equipment so as to avoid any inaccuracy in the determination

of the volume of Gas received and delivered.

(a) Turbine Meters. Turbine meters, shall be installed,

and Gas volumes computed, in accordance with

Transmission Measurement Committee Report No. 7 of the

American Gas Association, latest edition. Calibration

of turbine meters shall be at or near normal operating

pressure, against standards adopted by UTOS. The

measured volumes of Gas shall be adjusted to reflect

the deviation of Gas Volumes from the Ideal Gas Law.