MIGC LLC

Second Revised Volume No. 1

 Contents / Previous / Next / Main Tariff Index

 

 

Effective Date: 06/13/2008, Docket: RP08-376-000, Status: Effective

Original Sheet No. 55 Original Sheet No. 55 TRANSPORTATION GENERAL TERMS AND CONDITIONS (Continued) 2. Installation and Operation by Shipper - Shipper may install,maintain and operate at its own expense, at or near the Receipt Point(s) andthe Delivery Point(s) check meters and other necessary equipment by which thequantity of gas delivered to or by MIGC may be measured. Where used, orificemeters shall employ flange taps and shall be installed and operated inaccordance with the referenced Committee Report No. 3. 3. Non-interference - Measuring equipment applying to or affectingdeliveries shall be installed in such manner as to permit an accurate determin-ation of the quantity of gas delivered and ready verification of the accuracyof measurement. The parties shall exercise care in the installation,maintenance and operation of check measuring or pressure regulating equipmenton gas compressors so as to prevent any inaccuracy in the determination of thequantity of gas being measured. 4. Calibration and Test of Measurement Equipment - Each party shallhave the right to have representatives present at the time of any installing,cleaning, changing, repairing, inspecting, testing, calibrating or adjustingdone in connection with the other parties measuring equipment, includingcalorimeters, used in the measurement of deliveries of gas. The accuracy ofthe measuring equipment, including calorimeters, shall be verified atreasonable intervals but not more often than is found necessary in practice. 5. Electronic Flow Computers - It is recognized that electronic orother types of flow computers have been developed that permit the directcomputation of gas flows without the use of charts. Where the substitution ofthese devices is deemed acceptable by MIGC in the exercise of its reasonablejudgement, their use for the measurement required herein will be permitted.4. NOMINATIONS, SCHEDULING AND PRIORITY OF SERVICE 1. General - Whenever Shipper desires service, Shipper shall furnishto MIGC a separate written nomination for each nominated Receipt and DeliveryPoint under each Service Agreement with a begin date and end date, for flowwhich can be several days, months or years, provided the nomination begin andend dates are within the term of the Shipper's contract. All nominationsexcluding intra-day nominations