Bobcat Gas Storage

Original Volume No. 1

Effective Date: 10/15/2008, Docket: RP08-608-000, Status: Effective

Original Sheet No. 90 Original Sheet No. 90

GENERAL TERMS AND CONDITIONS

(Continued)

7. NOMINATIONS AND SCHEDULING (Continued)

7.2 Bobcat will accept nominations for service as follows: (Continued)

(f) Minimum NAESB Nomination Standards (Continued)

(4) The Intraday 2 Nomination Cycle: 5:00 p.m. for

nominations leaving control of the nominating party;

5:15 p.m. for receipt of nominations by Bobcat

(including from TTTSPs); 5:30 p.m. to send Quick

Response; 8:00 p.m. for receipt of completed

confirmations by Bobcat from upstream and downstream

connected parties; 9:00 p.m. for Bobcat to provide

scheduled quantities to affected Customers and point

operators, and to provide scheduled quantities to

bumped parties (notice to bumped parties) (Central

Clock Time on the Day). Scheduled quantities

resulting from Intraday 2 Nominations should be

effective at 9:00 p.m. on the Day. Bumping is not

allowed during the Intraday 2 Nomination Cycle.

For purposes of Sections 7.2(f)(2) through 7.2(f)(4),

"provide" shall mean, for transmittals pursuant to NAESB

Standards 1.4.x, receipt at the designated site, and for

purposes of other forms of transmittal, it shall mean send

or post.

7.3 Customer shall make available and tender any Gas to be injected

hereunder and receive and accept delivery upon tender by Bobcat

any Gas requested by Customer to be withdrawn from storage. The

quantity of Gas stored for the account of Customer shall be

increased or decreased upon injection or withdrawal of Gas from

storage, as applicable. Customer shall not (unless otherwise

agreed by Bobcat) receive or deliver Gas, nor shall Bobcat be

obligated to receive Gas or deliver Gas on an hourly basis at

rates of flow in excess of 1/24 of Customer's MDIQ or MDWQ. As

determined by Bobcat in its sole and reasonable judgment, flow

rates above 1/24 of Customer's MDIQ or MDWQ may be permitted.