ANR Storage Company

Original Volume No. 1

 Contents / Previous / Next / Main Tariff Index

 

 

Effective Date: 11/01/2007, Docket: RP08- 16-000, Status: Effective

First Revised Sheet No. 136 First Revised Sheet No. 136 : Effective

Superseding: Original Sheet No. 136

 

 

GENERAL TERMS AND CONDITIONS

(Continued)

 

of Natural Gas and Other Related Hydrocarbon

Fluids", as such publication may be revised from

time to time (hereinafter referred to as "AGA

Report No. 3); or

 

(2) A turbine meter, designed, installed, maintained

and operated as recommended in the latest issue of

American Gas Association Transmission Measurement

Committee Report No. 7, entitled "Measurement of

Fuel Gas by Turbine Meters", as such publication

may be revised from time to time (hereinafter

referred to as "AGA Report No. 7"); or

 

(3) A positive displacement meter, installed and

operated in accordance with generally accepted

industry practices.

 

(b) Auxiliary measuring equipment shall be installed,

maintained and operated in accordance with generally

accepted industry practices.

 

6.2(a) The volume of Gas delivered to Seller or

redelivered to or for the account of Customer

shall be calculated by means of either an

electronic flow computer, or by the processing of

meter charts, in either case in the following

manner:

 

(1) When the measuring equipment is an orifice meter,

the flow of Gas through the meter shall be

computed in the manner recommended in AGA Report

No. 3, properly using all factors set forth

therein.

 

(2) When the measuring equipment is a turbine meter,

the volume of Gas delivered through the meter

shall be computed in the manner recommended in AGA

Report No. 7, properly using all factors set forth

therein.

 

(3) When the measuring equipment is a positive

displacement meter, the volume of Gas delivered

through the meter shall be computed by properly

applying, to the volume delivered at flowing Gas

pressures and temperatures, correction factors for

(i) absolute static pressure, (ii) flowing Gas

temperature, and (iii) compressibility ratio.

 

(b) The volume of Gas injected or withdrawn hereunder shall

be computed using the standards and factors determined

as follows: