Kinder Morgan Louisiana Pipeline LLC

Original Volume No. 1

Effective Date: 03/01/2009, Docket: RP09-257-000, Status: Effective

Original Sheet No. 134 Original Sheet No. 134

GENERAL TERMS AND CONDITIONS

----------------------------

(d) The standard quantity for nominations, confirmation

and scheduling is dekatherms per Day in the United States,

gigajoules per Day in Canada and gigacalories per Day in Mexico.

(For reference, 1 dekatherm = 1,000,000 Btus; 1 gigajoule =

1,000,000,000 joules; and 1 gigacalorie = 1,000,000,000 calories.)

For commercial purposes, the standard conversion factor between

dekatherms and gigajoules is 1.055056 gigajoules per dekatherm and

between dekatherms and gigacalories is 0.251996 gigacalories per

dekatherm. The standard Btu is the International Btu, which is also

called the Btu (IT); the standard joule is the joule specified in

the SI system of units. The International Btu is specified for use

in the Gas measurement standards of the American Gas Association,

the American Petroleum Institute, the Gas Processors Association and

the American Society for Testing Materials. For non-commercial

purposes, these associations note that the exact conversion factor

is 1.05505585262 gigajoules per dekatherm.

6.2 STANDARD NOMINATION CYCLES

KMLP supports the following standard nomination cycles:

(a) The Timely Nomination Cycle: 11:30 a.m. for

nominations leaving control of the nomination party; 11:45 a.m. for

receipt of nominations by KMLP; noon to send Quick Response; 3:30

p.m. for receipt of completed confirmations by KMLP from upstream

and downstream connected parties; 4:30 p.m. for receipt of scheduled

quantities by Shipper and point operator (central clock time on the

Day prior to flow).

(b) The Evening Nomination Cycle: 6:00 p.m. for

nominations leaving control of the nominating party; 6:15 p.m. for

receipt of nominations by KMLP; 6:30 p.m. to send Quick Response;

9:00 p.m. for receipt of completed confirmations by KMLP from

upstream and downstream connected parties; 10:00 p.m. for KMLP to

provide scheduled quantities to affected Shippers and point

operators, and to provide scheduled quantities to bumped parties

(notice to bumped parties), (central clock time on the Day prior to

flow).