White River Hub, LLC

Original Volume No. 1

 Contents / Previous / Next / Main Tariff Index

 

 

Effective Date: 11/01/2008, Docket: RP08-645-000, Status: Effective

Original Sheet No. 131 Original Sheet No. 131

 

GENERAL TERMS AND CONDITIONS

(Continued)

 

14.13 Failure of Measurement Equipment. If any measurement equipment is

out of service or is found registering inaccurately and the error is not

determinable by test, or by previous recordings, receipts or deliveries

through such equipment will be estimated and agreed to by the parties upon the

first of the following methods that is feasible:

 

(a) By correcting the error if the percentage of error is

ascertainable by calibration, special test, or mathematical calculation, or,

in the absence of (a);

 

(b) By using the registration of any check meter or meters, if

installed and accurately registering, or, in the absence of (a) and (b);

 

(c) By estimating the quantity of gas received or delivered

based on receipts or deliveries during preceding periods under similar

conditions when the measurement equipment was registering accurately.

 

14.14 Preservation of Records. White River will retain data as may be

required by appropriate authority.

 

14.15 Measurement Data Corrections. Measurement data corrections will

be processed within six months of the production month with a three-month

rebuttal period. This standard will not apply in the case of deliberate

omission or misrepresentation or mutual mistake of fact. Parties' other

statutory or contractual rights shall not otherwise be diminished by this

standard (NAESB 2.3.14).

 

14.16 Cutoff. The cutoff for the closing of measurement is five

business days after the business month.