White River Hub, LLC

Original Volume No. 1

 Contents / Previous / Next / Main Tariff Index

 

 

Effective Date: 11/01/2008, Docket: RP08-645-000, Status: Effective

Original Sheet No. 126 Original Sheet No. 126

 

GENERAL TERMS AND CONDITIONS

(Continued)

 

14. MEASUREMENT

 

14.1 References. The following reports and standards stated in this §

14 will be used by White River when applying measurement practices. White

River may adopt updates to these reports and standards, as amended from time

to time.

 

American Gas Association, AGA Report No. 3, Orifice Metering of Natural Gas

and Other Related Hydrocarbon Fluids, Part 2, Specification and Installation

Requirements (AGA Report No. 3, Part 2).

 

American Gas Association, ANSI B109.3, Rotary-Type Gas Displacement Meters

(AGA ANSI B109.3).

 

American Gas Association, Compressibility Factors of Natural Gas and Other

Related Hydrocarbon Gases, Transmission Measurement Committee Report No. 8

(AGA Report No. 8).

 

American Gas Association, Measurement of Gas by Multipath Ultrasonic Meters,

Transmission Measurement Committee Report No. 9 (AGA Report No. 9).

 

American Gas Association, Measurement of Gas by Turbine Meters, Transmission

Measurement Committee Report No. 7 (AGA Report No. 7).

 

American Petroleum Institute, Manual of Petroleum Measurement Standards

Chapter 14, Natural Gas Fluids Measurement, Section 1, Collecting and Handling

of Natural Gas Samples for Custody Transfer (API Chapter 14.1).

 

American Petroleum Institute, Manual of Petroleum Measurement Standards

Chapter 14, Natural Gas Fluids Measurement, Section 3, Orifice Metering of

Natural Gas and Other Related Hydrocarbon Fluids, API Standard 2530 (API

Chapter 14.3).

 

American Petroleum Institute, Manual of Petroleum Measurement Standards

Chapter 21, Flow Measurement Using Electronic Metering Systems, Section 1,

Electronic Gas Measurement (API Chapter 21.1).

 

Gas Processors Association Standard 2145-03, Table of Physical Constants for

Hydrocarbons and Other Compounds of Interest to the Natural Gas Industry (GPA

Standard 2145-03).

 

Gas Processors Association Standard 2172-96, Calculation of Gross Heating

Value, Relative Density and Compressibility Factor for Natural Gas Mixtures

from Compositional Analysis (GPA Standard 2172-96).

 

Gas Processors Association Standard 2261-00, Analysis for Natural Gas and

Similar Gaseous Mixtures by Gas Chromatography (GPA Standard 2261-00).