Texas Eastern Transmission, L P

Seventh Revised Volume No. 1

 Contents / Previous / Next / Main Tariff Index

 

 

Effective Date: 11/16/2009, Docket: RP10-53-000, Status: Effective

First Revised Sheet No. 580 First Revised Sheet No. 580

Superseding: Original Sheet No. 580

 

GENERAL TERMS AND CONDITIONS

(Continued)

 

7.10 Flow Control

 

The Pipeline shall control flow of Gas into and out of its facilities at all

measurement facilities, but may allow the following if all of Pipeline's operating

standards and requirements are met: (a) Pipeline may allow third parties to control

flow into the Pipeline's facilities, and (b) Pipeline may allow third parties to

control flow out of the Pipeline's facilities, but reserves the right to override the

third party's flow control equipment.

 

7.11 Maintenance

 

(A) Major Maintenance

 

Major Maintenance shall include, but not be limited to, the repair or

replacement of major components and equipment required to support the

Measurement Operations. For measurement facilities which Customer or third

party owns and for which Pipeline performs Measurement Operations, such Customer

or third party shall be responsible for any and all associated costs of such

Major Maintenance unless otherwise agreed by Pipeline and Customer or third

party.

 

(B) Routine Maintenance

 

Routine Maintenance shall be the normal day to day maintenance required to

support the Measurement Operations or necessary to upkeep the measurement

facility and shall include, but not be limited to, replacement of minor

replacement parts for instrumentation, measurement equipment (including the RTU)

and minor valves and piping. The entity (Pipeline, Customer or third party)

which performs the Measurement Operations for the measurement facility shall

also be responsible for such Routine Maintenance and any and all associated

costs of such Routine Maintenance unless otherwise agreed by Pipeline and

Customer or third party.