U S G Pipeline Company

ORIGINAL VOLUME NO. 1

Effective Date: 04/01/2000, Docket: CP99-211-001, Status: Effective

Original Sheet No. 22 Original Sheet No. 22 : Effective

GENERAL TERMS AND CONDITIONS

2. QUALITY

Shipper is obligated to deliver to Transporter gas meeting the quality

specifications in the Delivering Pipeline's tariff.

3. MEASUREMENT

3.1 Unit of Measurement: The transportation unit of gas received and

delivered by Transporter shall be a dekatherm, unless otherwise

indicated in this tariff.

3.2 Determination of Volume and Total Heating Value: The volume and the

total heating value of gas received and delivered by Transporter

shall be determined as follows, provided that Transporter shall have

the right, at any time, to rely on the Delivering Pipeline's

measurements and statements for quantities and heating values of gas

received by Transporter.

(a) The unit of volume, for the purpose of measurement, shall be

one (1) cubic foot of gas at a temperature of sixty degrees

(60o) Fahrenheit, and at a pressure of thirty-three hundredths

(.33) pounds per square inch above an assumed atmospheric

pressure of fourteen and four tenths (14.4) pounds per square

inch (fourteen and seventy-three hundredths (14.73) pounds per

square inch absolute pressure) and dry. For gas volumes

reported in cubic meters, the standard conditions are 101.325

kPa, 15 degrees C, and dry.

(b) The total heating value of the gas per cubic foot shall be as

determined by the Delivering Pipeline.