Phillips Gas Pipeline Company

First Revised Volume No. 1

Effective Date: 06/01/1993, Docket: RS92- 47-003, Status: Effective

Original Sheet No. 32 Original Sheet No. 32 : Effective

2.2 Composition and Heating Value Determination:

(a) The quarterly specifications of the gas received

hereunder shall be determined by tests which PGPL

shall cause to be made at each receiving point and

further as agreed by PGPL and Shipper.

(b) Quarterly, or as often as PGPL deems advisable, PGPL

shall cause to be obtained a representative sample of

Shipper's gas at each point of receipt and delivery and

by means of chromatography or other accepted method

in the industry determine the composition and gross

heating value of Shipper's gas in British Thermal Units

(Btu) per cubic foot on a dry basis. The first such

determination shall be made within a reasonable time

after receipt of gas begins and shall apply until the first

day of the month following the next determination.

PGPL shall notify Shipper in writing of the date of the

test at least ten (10) days prior thereto. Shipper may

witness the tests or make joint tests with its own

appliances.

the other to remedy any deficiency in quality of the gas

received or delivered hereunder, and in the event such

deficiency is not remedied, either party shall have the

right, in addition to all other remedies available to it by

law, to refuse to accept such deficient gas until such

deficiency is remedied; however, PGPL shall be under

no obligation to deliver any quality of gas exceeding

merchantable quality.

3. MEASURING EQUIPMENT

3.1 Installation: At each point of receipt and delivery hereunder

all measuring equipment, devices and materials shall be

furnished and installed, owned, maintained and operated by

PGPL except as provided in Section 4.1 below; provided