Saltville Gas Storage Company L.L.C.
Original Volume No. 1
Contents / Previous / Next / Main Tariff Index
Effective Date: 10/01/2009, Docket: RP09-953-000, Status: Effective
Fourth Revised Sheet No. 125 Fourth Revised Sheet No. 125
Superseding: Third Revised Sheet No. 125
GENERAL TERMS AND CONDITIONS
(Continued)
The amount of capacity allocated to the Replacement
Customer(s) shall equal the original released quantity less
the recalled capacity that is adjusted based upon the
Elapsed Prorata Capacity ("EPC") or other tariff specific
variations of the EPC in accordance with NAESB WGQ Standard
No. 5.3.56. This allocated daily contractual quantity shall
be used for purposes of nominations, billing, and if
applicable, for overrun calculations. As a result of the
allocation of capacity described in this section, Saltville
shall not be obligated to deliver in excess of the total
daily contract quantity of the release as a result of NAESB
WGQ Standard No. 5.3.55, as set forth in this Section
4.13(f).
(g) Reput Provisions. Saltville shall support the function of
reputting by the Releasing Customer. The Releasing Customer
may reput previously recalled capacity to the Replacement
Customer pursuant to the reput rights and methods identified
in the Releasing Customer's offer to release capacity, as
required by Section 4.1(g). When capacity is recalled, such
capacity may not be reput for the same Gas Day. The
deadline for the Releasing Customer to notify Saltville of a
reput of capacity is 8:00 A.M. CCT to allow the Replacement
Customer to submit timely nominations for Gas to flow on the
next Gas Day.
(h) Following the awarding of capacity to a Replacement Customer
in accordance with the procedures provided in this section,
the Releasing Customer's rights and Saltville's obligations
under the Releasing Customer's service agreement shall be
modified and subject to the capacity rights released to the
Replacement Customer for the term of such release.
Effecting a release pursuant to the provisions of this
section shall constitute Releasing Customer's consent and
agreement to such amendment or modification of its existing
service agreement.
(i) The offer to release by a Customer under Rate Schedule FSS
must specify the quantities of MDDO, MDRO, MSQ, MDIQ, MDWQ
or rights offered, and actually available on the effective
date of the release, and the exercise of which rights, in
conjunction with Releasing Customer's exercise of its
retained rights, will not violate any maximum or minimum
quantity requirements or limitations applicable under the
Rate Schedule or the respective Service Agreements.
Releasing Customer shall be responsible for ensuring, if
applicable, whether by the withdrawal or transfer-in-place
of a portion of its Storage Inventory or otherwise as
required, that such storage capacity, and the corresponding
ability to inject/withdraw Gas up to the Maximum Storage
Quantity released, in accordance with the terms and
conditions of the Rate Schedule and within the time
remaining in the injection and/or withdrawal period, as
applicable, shall be available upon the commencement of the
release.