Williston Basin Interstate Pipeline Co.

Second Revised Volume No. 1

 Contents / Previous / Next / Main Tariff Index

Effective Date: 05/12/2008, Docket: RP08-315-000, Status: Effective

Second Revised Sheet No. 182A Second Revised Sheet No. 182A : Effective

Superseding: First Revised Sheet No. 182A

GENERAL TERMS AND CONDITIONS (Continued)

5. MEASUREMENT (Continued)

5.1.2 A Point Operator may install, maintain and operate, at

its own expense, such check measuring equipment as desired,

provided that such equipment shall be installed so as not to

affect Transporter's measuring equipment. A Point Operator may

utilize available meter and gas quality data from Transporter's

Remote Terminal Units (RTU). Such Point Operator shall assume

sole responsibility for all use of Transporter's RTU data and the

information transmitted and hereby indemnifies and holds

Transporter harmless against any liability or claim of any person

that is attributable to improper use by a Point Operator of

Transporter's RTU data and the information transmitted. Except

for the negligence, bad faith, fraud or willful misconduct of

Transporter, Transporter shall have no responsibility to a Point

Operator utilizing Transporter's RTU data and the information

transmitted for faulty retrieval, failure of retrieval, or loss of

research, and in no event will Transporter be liable for actual,

consequential, exemplary, or special damages resulting, in whole

or in part, from use of Transporter's RTU data and the information

transmitted. Any metering equipment installed by a Point Operator

or Transporter's RTU data utilized by a Point Operator in no

manner obligates Transporter to revise its Tariff procedures as

contained in this Tariff with regard to the status of a receipt

and/or delivery point(s) being classified as telemetered or non-

telemetered. If a Point Operator requests and receives assistance

from Transporter's employees, such assistance will be at a Point

Operator's risk and Transporter will not have any responsibility

or liability arising therefrom, except for the negligence, bad

faith, fraud or willful misconduct of Transporter.

5.2 Measurement procedures: Quantities of gas received and delivered

hereunder shall be measured in accordance with procedures contained in

ANSI-API 2530, First Edition, Second Edition, Third Edition, AGA

(The rest of the sheet has been intentionally left blank.)