Kinder Morgan Interstate Gas Transmission LLC
Second Revised Volume No. 1-D
Contents / Previous / Next / Main Tariff Index
Effective Date: 12/28/1999, Docket: GT00- 19-000, Status: Effective
Original Sheet No. 15 Original Sheet No. 15 : Effective
GENERAL TERMS AND CONDITIONS FOR SERVICES - continued
5.4 The components for determining the deviation from
Boyle's Law, at the pressure and temperature under
which delivered, shall be determined by tests at
intervals of twelve (12) months or at such shorter
interval as is found necessary in practice and the
correction factor so determined using American Gas
Association "Report Number Eight" or American Gas
Association "Project NX-19" shall be used in the
computation of deliveries until the next test.
5.5 The heating value of the gas delivered shall be
determined by approved recording calorimeters,
chromatographs, continuous samplers, or other
instruments, installed by Transporter at points on
Transporter's pipeline system.
5.6 The cutoff for the closing of measurement is 5 business
days after business month.
6. MEASURING EQUIPMENT
6.1 Transporter and Shipper shall agree regarding
arrangements for installation, ownership, operation and
maintenance at or near Points of Receipt and Points of
Delivery of measuring equipment, including heating
value measuring equipment and telemetering equipment,
which shall meet the qualifications set out in the
General Terms and Conditions of Transporter's Buffalo
Wallow FERC Gas Tariff.
6.2 If Shipper installs, maintains, or operates measuring
equipment, such actions shall be pursuant to the
specifications set forth in the General Terms and
Conditions of Transporter's Buffalo Wallow FERC Gas
Tariff. Transporter shall not be obligated to install
such measuring equipment.
6.3 Shipper may install, operate and maintain, at its own
expense, such check measuring equipment as it shall
desire, provided that such check meters and equipment
shall be so installed as not to interfere with the
operation of Transporter's meters at or near the Point
of Delivery. Transporter shall have access to such
check measuring equipment at all reasonable hours but
the reading, calibrating, and adjusting thereof and
changing of charts shall be done only by Shipper.