Kinder Morgan Interstate Gas Transmission LLC

Fourth Revised Volume No. 1-B

Effective Date: 12/28/1999, Docket: GT00- 19-000, Status: Effective

Original Sheet No. 16 Original Sheet No. 16 : Effective

GENERAL TERMS AND CONDITIONS FOR SERVICES - continued

5.4 The components for determining the deviation from

Boyle's Law, at the pressure and temperature under

which delivered, shall be determined by tests at

intervals of twelve (12) months or at such shorter

interval as is found necessary in practice and the

correction factor so determined using American Gas

Association "Report Number Eight" or American Gas

Association "Project NX-19" shall be used in the

computation of deliveries until the next test.

5.5 The heating value of the gas delivered shall be

determined by approved recording calorimeters,

chromatographs, continuous samplers, or other

instruments, installed by Transporter at points on

Transporter's pipeline system.

5.6 The cutoff for the closing of measurement is five

(5) business days after business month.

6. MEASURING EQUIPMENT

6.1 Transporter and Shipper shall agree regarding

arrangements for installation, ownership, operation

and maintenance at or near Points of Receipt and

Points of Delivery of measuring equipment,

including heating value measuring equipment and

telemetering equipment, which shall meet the

qualifications set out in the General Terms and

Conditions of Transporter's FERC Gas Tariff.

6.2 If Shipper installs, maintains, or operates

measuring equipment, such actions shall be pursuant

to the specifications set forth in the General

Terms and Conditions of Transporter's FERC Gas

Tariff. Transporter shall not be obligated to

install such measuring equipment.

6.3 Shipper may install, operate and maintain, at its

own expense, such check measuring equipment as it

shall desire, provided that such check meters and

equipment shall be so installed as not to interfere

with the operation of Transporter's meters at or

near the Point of Delivery. Transporter shall have

access to such check measuring equipment at all

reasonable hours but the reading, calibrating and

adjusting thereof and changing of charts shall be

done only by Shipper.