Vector Pipeline L.P.

Original Volume No. 1

 Contents / Previous / Next / Main Tariff Index

 

 

Effective Date: 06/01/2010, Docket: RP10-678-000, Status: Effective

Fourth Revised Sheet No. 114 Fourth Revised Sheet No. 114

Superseding: Third Revised Sheet No. 114

 

7. In the event a meter is out of service or registering

inaccurately, the volume of Gas delivered during the period that

such meter is out of service or registering inaccurately shall be

determined:

 

(a) By using the registration of any check meter or meters, if

installed and accurately registering; or, in the absence of

(a);

 

(b) By correcting the error if the percentage of error is

ascertainable by calibration, tests, or mathematical

calculation; or, in the absence of both (a) and (b);

 

(c) By estimating the quantity of delivery by deliveries during

periods under similar conditions when the meter was

registering accurately.

 

8. Prior Period Adjustments - Pursuant to NAESB Standards 2.3.7,

2.3.11, 2.3.12, 2.3.13, 2.3.14: The cutoff for the closing of

measurement is 5 Business Days after the business month. For

treatment of measurement prior period adjustments, treat the

adjustment by taking it back to the production month. A meter

adjustment becomes a prior period adjustment after the fifth

Business Day following the business month. For reporting

measurement prior period adjustments, report it with the restated

line item with new total quantity for the Day and the month.

Estimate missing or late measurement data and treat actual as a

prior period adjustment, with the measuring party to provide the

estimate. Measurement data corrections should be processed within

6 months of the production month with a 3-month rebuttal period.

This standard shall not apply in the case of deliberate omission

or misrepresentation or mutual mistake of fact. Parties' other

statutory or contractual rights shall not otherwise be diminished

by this standard.

 

5. NOMINATIONS

 

1. For service required on any Day under each of Shipper's

Transportation Agreements, nomination(s) are to be communicated to

Transporter via QuickNom™, providing the Shipper's requested

Receipt Point(s), contract numbers, the applicable service, the

quantity of Gas to be delivered, the requested Delivery Point(s),

and such additional information as Transporter determines to be

necessary.

 

2. General Rules and Timeline - Pursuant to NAESB Standards 1.3.2,

1.3.3, 1.3.5, 1.3.6, 1.3.20, 1.3.21: The standard nominations

timeline shall be as follows: