Gulf South Pipeline Company L P
Sixth Revised Volume No. 1
Contents / Previous / Next / Main Tariff Index
Effective Date: 12/31/2000, Docket: GT01- 6-000, Status: Effective
Original Sheet No. 1001 Original Sheet No. 1001 : Effective
GENERAL TERMS AND CONDITIONS
Section 3
(Continued)
(c) Positive Displacement - Measurement by positive displacement
meter shall be in accordance with A.G.A. Report No. 6
including any revisions, amendments or supplements which
meet generally accepted industry standards and practices and
are acceptable to Gulf South, unless otherwise specified by
mutual agreement between Gulf South and Customer.
(d) Ultrasonic Metering - Measurement by ultrasonic meter shall
be in accordance with A.G.A. Report No. 9 including any
revisions, amendments or supplements, and which meet
generally accepted industry standards and are acceptable to
Gulf South, unless otherwise specified by mutual agreement
between Gulf South and Customer.
(e) Other A.G.A. Approved Methods - Measurement by other
methods approved by A.G.A shall be in accordance with the
methods applicable A.G.A. Report including any revisions,
amendments or supplements, and which meet generally
accepted industry standards and are acceptable to Gulf
South, unless otherwise specified by mutual agreement
between Gulf South and Customer.
(f) At any point where gas is delivered through a positive or
turbine meter or meters without a volume and pressure
gauge, the greatest day's delivery during any month shall
be assumed to be 0.053 multiplied by the volume of gas
delivered at such point during the month, unless otherwise
agreed by Gulf South and Customer.
3.4 Measurement by Other Methods - When measurement is by other than
those set forth herein or if a new measurement method or technique
is developed with respect to gas measurement, such method or
technique may be substituted for any method set forth herein
provided such method or technique meets generally accepted
industry standards and practices and is accepted by mutual
agreement between Gulf South and Customer.