Steuben Gas Storage Company

Original Volume No. 1

 Contents / Previous / Next / Main Tariff Index

Effective Date: 06/27/1996, Docket: CP96- 35-002, Status: Effective

Original Sheet No. 139 Original Sheet No. 139 : Effective

GENERAL TERMS AND CONDITIONS

(Continued)

which will access measurement data on a real time basis and

transmit such data to its operating location.

6.9 Check Measuring Equipment: Unless otherwise agreed among

Customer, Transporter, and Seller, Customer shall cause

Transporter to allow Seller to install, maintain and operate,

at its own expense, such check measuring equipment as it shall

desire at the Point of Injection/Withdrawal, and further cause

Transporter to provide a suitable site therefore and allow

Seller free access to and use of the site; provided that such

equipment shall be so installed, maintained and operated as

not to interfere with the operation or maintenance of

Transporter's measuring equipment at the Point of

Injection/Withdrawal. Customer or Transporter shall have free

access to the check measuring equipment at all reasonable

hours. The reading, calibrating and adjusting thereof and the

changing of charts shall be done by Seller, but Customer or

Transporter shall be given reasonable notice thereof.

Customer shall cause Transporter to allow Seller to remove any

of its equipment at any time. It is expressly agreed that

Customer or Transporter shall not be responsible or liable for

the care or maintenance or for damage, unless due to the sole

negligence of Customer and/or Transporter, to or regarding

such check measuring equipment installed by or on behalf of

Seller.

6.10 Failure of Measuring Equipment: Seller and Customer agree

that if for any reason Transporter's measuring equipment is

out of service or out of repair so that the quantity of gas

delivered is not correctly indicated by the reading thereof,

the gas delivered through the period such measuring equipment

is out of service or out of repair shall be estimated and

agreed upon on the basis of the best data available, using the

first of the following methods which is feasible:

(a) by using the registration of any check meter or meters if

installed and accurately registering; or