Steuben Gas Storage Company
Original Volume No. 1
Contents / Previous / Next / Main Tariff Index
Effective Date: 06/01/1997, Docket: RP97-177-001, Status: Effective
First Revised Sheet No. 124 First Revised Sheet No. 124 : Effective
Superseding: Original Sheet No. 124
GENERAL TERMS AND CONDITIONS
1.1 The term "Agreement" shall mean the Service Agreement executed
by the Customer and Seller and any exhibits, attachments
and/or amendments thereto.
1.2 The term "BTU" shall mean one (1) British thermal unit, the
amount of heat required to raise the temperature of one (1)
pound of water one degree (1) Fahrenheit at sixty degrees (60)
Fahrenheit. (BTU is measured on a dry basis at 14.73 psia.)
1.3 The term "Commission" and "FERC" shall mean the Federal Energy
Regulatory Commission or any successor regulatory authority
1.4 The term "Customer" shall mean any person, corporation,
partnership or any other party that executes a valid Service
Agreement with Steuben Gas Storage Company for the Storage of
Gas under the terms and conditions of Seller's FERC Gas
1.5 The term "Day" shall mean a period of consecutive hours,
beginning at 9:00 a.m., Central Clock Time and ending on the
following 9:00 a.m. Central Clock Time.
1.6 The term "Dekatherm" (dth) shall mean the quantity of heat
energy which is equivalent to one (1) million (1,000,000) BTU;
thus the term Mdth shall mean one (1) thousand dth.
1.7 The determination of quantities deemed to be delivered for
purposes of use of the term "Each Dekatherm Of Gas Which Is
Delivered" shall be the pro rata allocation of the quantities
of Gas nominated, after adjustments for Seller's Use and
pursuant to Section 4.3 hereof, for injection into storage or
for withdrawal from storage.
1.8 The term "Equivalent Quantities" shall mean a quantity of Gas
containing an amount of dths equal to the amount of dths
received by Seller for the account of Customer at the Point of
Injection reduced by the dths removed for Seller's Injection
and/or Withdrawal Use as attributable to the Storage of
1.9 The term "Point of Injection/Withdrawal" shall mean the Point
of Injection and/or the Point of Withdrawal.
1.10 The term "Gas" shall mean natural gas, including casinghead