Venice Gathering System, L. L. C.

Original Volume No. 1

 Contents / Previous / Next / Main Tariff Index

 

 

Effective Date: 01/01/1998, Docket: CP97-533-002, Status: Effective

Original Sheet No. 167 Original Sheet No. 167 : Effective

 

 

GENERAL TERMS AND CONDITIONS

(Continued)

 

17.6 Correction of Metering Errors

 

a. Error Correction, >1.0%: If during any

test of the measuring equipment, an

adjustment or calibration error is found

which results in an incremental

adjustment to the calculated hourly flow

rate through each meter run in excess of

one percent (1.0%) of the correct flow

rate (whether positive or negative and

using the correct flow rate as the

percent error equation denominator), and

the total measurement adjustment during a

Month is greater than 500 MMBTU, then any

previous recording of such equipment

shall be corrected to zero (0) error for

any period which the error existed (and

which is either known definitely or

agreed to by both parties) and the total

flow for the period redetermined in

accordance with the provisions of Section

17.11 below. If the period of error

cannot be determined or agreed upon

between the parties, such correction

shall be made over a period extending

over the last one-half (1/2) of the time

elapsed since the date of the last

correct test.