Scg Pipeline Inc.

Original Volume No. 1

 Contents / Previous / Next / Main Tariff Index

 

 

Effective Date: 11/01/2003, Docket: RP03-611-000, Status: Effective

Original Sheet No.136 Original Sheet No.136 : Superseded

 

 

GENERAL TERMS AND CONDITIONS

(continued)

 

 

(d) Any errors or discrepancies found when testing shall be corrected

immediately whenever possible or as soon thereafter as procurement of repair

parts, materials and tools can be arranged.

 

 

16.6 Measurement Equipment Inaccuracy and Failure. The quantity of gas

received and delivered by Pipeline and delivered to Shipper or for Shipper's

account hereunder during periods when the measurement equipment is out of

service or registering inaccurately shall be estimated as follows:

 

(a) If, upon test, any measurement equipment, the readings of which are used

in the registration, integration or computation of quantities of gas

hereunder, is found to be in error to the extent that it introduces not more

than one percent (1%) measurement error in the individual measurement

equipment affected, previous records of such equipment shall be considered

accurate;

 

(b) If, upon test, any such above measurement equipment is found to be in

error, to the extent that it causes the registered or computed quantities of

the instrument(s) so affected to be in error, by an amount exceeding one

percent (1%) at a recording corresponding to the average hourly rate of

flowthrough the instrument(s) in the period since the last preceding test,

then any registrations, integration or computed quantities of such

instrument(s) affected shall be corrected to zero (0) error for any part of

the period since the last test in which such error is known to have existed or

which may be agreed upon by representatives of the parties. In case the

period of such error is not known definitely or agreed upon, such correction

shall be for a period of one-half (1/2) of the elapsed time since the date of

the last test, but not exceeding a correction period of sixteen (16) Gas Days

where orifice measurement equipment is used in the computation of quantity and

not exceeding forty-five (45) Gas Days where other measurement equipment is

used; and