Sabine Pipe Line Company LLC

Original Volume No. 1

 Contents / Previous / Next / Main Tariff Index

 

 

Effective Date: 05/01/2000, Docket: CP00- 24-001, Status: Effective

Original Sheet No. 279 Original Sheet No. 279 : Effective

 

 

14. METERING AND PIPELINE FACILITIES

 

14.1 Metering Facilities

 

Upon agreement with Sabine, either Sabine or an

interconnecting Operator may install, own, maintain and

operate metering facilities properly equipped with

orifice meters and other necessary measuring equipment

required to measure the quantities of gas received into

Sabine's System or delivered from Sabine's System.

Such metering facilities shall be located at or near

the Receipt or Delivery Point(s).

 

14.2 Check Meters

 

Either Sabine or the interconnecting Operator may, at

its option and expense, install and operate check

meter(s) to check the other party's meters.

 

14.3 Access to Metering Facilities

 

Either Sabine or the interconnecting Operator shall, at

all reasonable times, have access to the other party's

metering and regulating facilities for inspection and

checking, but the reading, calibration and adjustment

thereof shall be done only by the Operator of such

metering and regulating facilities.

 

14.4 Calibration and Testing

 

At least once each month, either Sabine or the

interconnecting Operator will calibrate its meters and

measuring equipment and if so requested, in the

presence of representatives of the other party, and the

parties shall jointly observe any adjustments which are

made to the meters or measuring equipment, should such

adjustments be necessary. Likewise, any calibration

and adjustment of the other party's check meters shall

be jointly observed by representatives of both parties.

Each party shall give to the other party notice of the

time of all tests of meters at least five (5) Days in

advance of the holding of the test so that the other

party may conveniently have its representatives

present. If the required notice