Midwestern Gas Transmission Company
SECOND REVISED VOLUME NO. 1
Contents / Previous / Next / Main Tariff Index
Effective Date: 09/01/1993, Docket: RS92- 41-003, Status: Effective
Original Sheet No. 68 Original Sheet No. 68 : Effective
GENERAL TERMS AND CONDITIONS
(c) Turbine Meters: Turbine meters, if used, shall be installed, and volumes
computed, in accordance with American Gas Association report 7, dated
November, 1984 and any modifications and amendments thereof.
(d) Electronic Flow Computers: electronic or other types of flow computers if
used, shall be installed, and volumes calculated in accordance with
generally accepted industry practices.
(e) New Measurement Techniques: If, at any time, a new method or technique is
developed with respect to gas measurement or the determination of the
factors used in such gas measurement, such new method or technique may be
substituted upon mutual agreement thereto by the parties.
2. Check measuring equipment: Check measuring equipment shall be limited to one
Transporter, one Shipper and one Operator where each may install, maintain and
operate, at its own expense, such check measuring equipment as desired, provided
that such equipment shall be so installed as not to interfere with the operation
of the primary measuring equipment or the operation of the facility or the other
party's measuring equipment.
3. Right to be present: Transporter, Shipper, or Operator shall have the right to
have representatives present at the time of any installing, reading, cleaning,
changing, repairing, inspecting, testing, calibrating, or adjusting done in
connection with the other's measuring equipment used in measuring or checking
the measurement of deliveries of gas under the transportation contract. The
records from such measuring equipment shall remain the property of their owner,
but, upon request, each will submit to the other its records, together with
calculations therefor, for inspection and verification, subject to return within
ten days after receipt thereof.
4. Care required: All installations of measuring equipment applying to or
affecting deliveries of gas shall be made in such manner as to permit an
accurate determination of the quantity of gas delivered and ready verification
of the accuracy of measurement. Care shall be exercised by both parties in the
installation, maintenance, and operation of pressure-regulating equipment so as
to prevent any inaccuracy in the determination of the volume of gas delivered
under the transportation contract.