ANR Pipeline Company

Second Revised Volume No. 1

Effective Date: 11/01/1993, Docket: RS92- 1-005, Status: Effective

Original Sheet No. 127 Original Sheet No. 127 : Superseded

GENERAL TERMS AND CONDITIONS

(Continued)

Gas delivered through a meter, the flowing Gas

temperature for only the period(s) of time that Gas

was flowing through the meter shall be used.

12.3 All flow, measuring, testing and related equipment shall be of

standard manufacture and type approved by Transporter. If

applicable, Transporter or Shipper may install check measuring

equipment and telemetering equipment, provided that such

equipment shall be so installed as not to interfere with the

operations of the operator. Transporter, or Shipper, in the

presence of the other party, shall have access to measuring

equipment at all reasonable times, but the reading,

calibrating, and adjusting thereof and the changing of charts,

if any, shall be done by the operator of the facilities.

Transporter or Shipper shall have the right to be present at

the time of the installing, reading, cleaning, changing,

repairing, inspecting, testing, calibrating or adjusting done

by the operator of the measuring equipment. The records from

such measuring equipment shall remain the property of the

operator, but upon request, the other party may request

records, including charts, if any, together with calculations

therefrom for inspection, subject to return within thirty (30)

Days after receipt thereof. Reasonable care shall be exercised

in the installation, maintenance and operation of the measuring

equipment so as to avoid any inaccuracy in the determination of

the volume of Gas received and delivered.

The accuracy of all measuring equipment shall be verified by

operator at reasonable intervals, and if requested, in the

presence of representatives of the other party, but neither

Transporter nor Shipper shall be required to verify the

accuracy of such equipment more frequently than once in any

thirty (30) Day period. If the operator agrees to verification

and test of measuring equipment and fails to perform such

verification and testing, then the other party shall have the

right to cease or temporarily discontinue service under this

Agreement relative to such measuring equipment. If either

party at any time desires a special test of any measuring

equipment, it will promptly notify the other party and the

parties shall then cooperate to secure a prompt verification of

the accuracy of such equipment. Transportation and related

expenses involved in the testing of meters shall be borne by

the party incurring such expenses, provided, however, that