Millennium Pipeline Company, L. L. C.

Original Volume No. 1

Effective Date: 12/22/2008, Docket: CP98-150-011, Status: Effective

Original Sheet No. 284 Original Sheet No. 284

GENERAL TERMS AND CONDITIONS

(Continued)

(d) Shipper and Transporter shall have the right to be present at

the time of any installation, reading, cleaning, change of charts, repair,

inspection, test, calibration, or adjustment made in connection with

Transporter's or Shipper's measuring stations or equipment used to measure

gas received by Transporter for Shipper or delivered by Transporter to

Shipper.

(e) The Records from measuring equipment shall remain the property

of the operator of such equipment, but upon request the operator will submit

to the other party its Records, together with calculations therefrom, for

inspection, subject to return within 30 days after receipt thereof.

(f) Orifice meters shall be installed and operated, and gas

quantities computed, in accordance with AGA Report No. 3, American National

Standards Institute ANSI/API 2530, "Orifice Metering of Natural Gas", revised

Second Edition, 1985, applied in a practical and appropriate manner, except

that the supercompressibility factor shall be calculated in accordance with

Section 26.8 above.

(g) Turbine meters shall be installed and operated, and gas

quantities computed, in accordance with AGA Transmission Measurement

Committee Report No. 7, "Measurement of Gas by Turbine Meters", 1985 Edition,

applied in a practical and appropriate manner, except that the

supercompressibility factor shall be calculated in accordance with Section

26.8 above.

(h) Diaphragm meters shall be installed and operated, and gas

quantities computed, in accordance with ANSI B109.1 or B109.2, "Diaphragm

Type Gas Displacement Meters", 1986, applied in a practical and appropriate

manner, except that the supercompressibility factor shall be calculated in

accordance with Section 26.8 above.

(i) Rotary meters shall be installed and operated, and gas

quantities computed, in accordance with ANSI B109.3, "Rotary Type Gas

Displacement Meters", 1986, applied in a practical and appropriate manner,

except that the supercompressibility factor shall be calculated in accordance

with Section 26.8 above.