Millennium Pipeline Company, L. L. C.

Original Volume No. 1

 Contents / Previous / Next / Main Tariff Index

Effective Date: 11/01/2009, Docket: RP10-17-001, Status: Effective

Substitute First Revised Sheet No. 283 Substitute First Revised Sheet No. 283

Superseding: First Revised Sheet No. 283

GENERAL TERMS AND CONDITIONS

(Continued)

(b) by prospective application of the arithmetic

or other average of the concentrations of nitrogen and carbon

dioxide Record, or

(c) by prospective application of the results of

analyses of samples of the gas; or

(2) where Electronic Measurement equipment is not

provided,

(a) by the contemporaneous application of the

arithmetic or other average of the hourly or daily

concentrations of nitrogen and carbon dioxide, or

(b) by prospective application of the results of

analyses of samples of the gas; or by any other method or

methods mutually agreed upon by Shipper and Transporter.

26.9 Measuring Equipment.

(a) Unless otherwise agreed to in writing, Transporter will own,

operate, maintain, and install measuring stations and equipment by which the

volumes of natural gas or quantities of energy received or delivered by

Transporter are determined. Notwithstanding any other provision in this FERC

Gas Tariff, Transporter may not be required to pay for or to construct or

install measuring equipment.

(b) Unless otherwise agreed to in writing, or unless gas is being

received from an interstate pipeline company which has a Commission approved

FERC Gas Tariff governing measurement of gas it delivers, Transporter will

install, own, operate and maintain measuring stations and equipment by which

the volumes of natural gas or quantities of energy received by Transporter

are determined.

(c) Where Transporter has agreed in writing to permit measuring

stations and associated equipment to be installed by Shipper, they must be

designed and installed in accordance with all engineering and other standards

and practices as specified by Transporter, and Transporter has the right to

be present and inspect the installation of all such measuring stations and

equipment to insure compliance with such standards and practices. Shipper

and Transporter will agree in writing to reasonable standards and practices

by which such measuring stations and associated equipment must be operated

and maintained by Shipper as required to insure the continuous accuracy

thereof.