Gulfstream Natural Gas System, L.L.C.

Original Volume No. 1

Effective Date: 05/21/2002, Docket: CP00- 6-004, Status: Effective

Original Sheet No. 116 Original Sheet No. 116 : Effective

GENERAL TERMS AND CONDITIONS

(CONTINUED)

If, upon any test, any measuring equipment is found to be

in error, such errors shall be taken into account in a

practical manner in computing the deliveries. If the

resultant aggregate error in the computed receipts or

deliveries is not more than one percent (1%), then previous

receipts or deliveries shall be considered accurate. All

equipment shall, in any case, be adjusted at the time of

test to record correctly. If, however, the resultant

aggregate error in computing receipts or deliveries exceeds

one percent (1%), the previous recordings of such equipment

shall be corrected to zero error for any period which is

known definitely or agreed upon, but in case the period is

not known definitely or agreed upon, such correction shall

be for a period extending over one-half of the time elapsed

since the date of the last test.

2.4 In the event any measuring equipment is out of service, or

is found registering inaccurately and the error is not

determinable by test, previous recordings of receipts or

deliveries through such equipment shall be determined as

follows; provided, however, that the correction period

shall be within six (6) Months of the production Month,

with a three (3) Month rebuttal period and provided,

further, that such standard shall not apply in the case of

deliberate omission or misrepresentation or mutual mistake

of fact. Parties' other statutory or contractual rights

shall not otherwise be diminished by this standard:

(a) by using the registration of any check meter or

meters if installed and accurately registering, or in

the absence of (a);

(b) by correcting the error if the percentage of error is

ascertainable by calibration, special test or

mathematical calculation, or in the absence of both

(a) and (b) then;