Kentucky West Virginia Gas Company

Third Revised Volume No. 1

Effective Date: 06/01/1997, Docket: RP97-104-001, Status: Effective

First Revised Sheet No. 107 First Revised Sheet No. 107 : Superseded

Superseding: Original Sheet No. 107

GENERAL TERMS AND CONDITIONS (Continued)

(f) The Total Heating Value shall be calculated pursuant to standards

set forth in American Gas Association Report No. 5, or by other

methods mutually agreed upon by Customer and Pipeline.

(g) The deviation of the gas from Boyle's and Charles' Law shall be

determined in accordance with the Gas Measurement Committee

Report No. 3 of the American Gas Association as now and from

time to time amended, including the AGA manual for the

determination of Supercompressibility Factors for Natural Gas.

4.1 Measurement Corrections. The cutoff for the closing of

measurement is five (5) business days after the business month.

If an error is discovered in the measured quantities, such error

shall be adjusted within thirty (30) days of the determination

thereof; provided, however, that any claim for adjustment shall

be made within six (6) months of the production month in which

the claimed error occurred. The time for dispute or resolution

of the claim shall be three (3) months from the date the claim

is made. Such time limits shall not apply in the case of

deliberate omission or misrepresentation, or mutual mistake of

fact, nor shall this provision diminish other statutory or

contractual rights of the parties.

5. MEASURING EQUIPMENT

5.1 Measuring Equipment

All measuring facilities shall be installed, owned, maintained

and operated as determined solely by the Pipeline and shall

consist at the time of installation of the necessary metering

devices, designed and installed in accordance with the current

published recommendations of the American Gas Association.

5.2 Check Measuring Equipment

Customer may install, operate, and maintain, at its own expense,

such check equipment as it shall desire, provided that such

equipment shall be so installed as not to interfere with the

operation of Pipeline's equipment. Pipeline shall have access to

such check equipment at all reasonable hours.

5.3 Access to Equipment and Records

Each party shall have the right to be present at the time of any

installing, reading, cleaning, changing, repairing, inspecting,

testing, calibrating, or adjusting done in connection with the

measuring equipment used in measuring deliveries hereunder. The

records from such measuring equipment shall remain the property