Guardian Pipeline, L.L.C.

Original Volume No. 1

Effective Date: 12/01/2002, Docket: RP02-534-000, Status: Effective

Original Sheet No. 118 Original Sheet No. 118 : Superseded

GENERAL TERMS AND CONDITIONS

(Continued)

5. MEASUREMENT & MEASUREMENT EQUIPMENT (Continued)

third parties the right to perform Measurement

Operations; provided, however that such third-party

furnishes to Transporter all data required for flow

computations and can meet Transporter's measurement

and operating standards; provided further, each third-

party which performs such Measurement Operations shall

be responsible for any and all associated costs of

such Measurement Operations unless otherwise agreed to

by Transporter and such third-party. Measurement

equipment shall consist of the necessary metering

devices, designed and installed in accordance with the

current published recommendations of the American Gas

Association or as mutually agreed upon by Connecting

Party and Transporter; provided, however, Transporter

shall have the right to require and may install or

cause to be installed electronic Natural Gas

measurement and control equipment at all points.

(a) Where orifice measurement equipment is to be

used, orifice meter installation shall conform

to the recommendations for design and

installation contained in AGA Report No. 3, as

revised September 1992 and as such report may

hereafter be further revised or as may be

mutually agreed upon by Connecting Party and

Transporter.

(b) Turbine meter installation shall conform to the

recommendations for design and installation

contained in Natural Gas Measurement Committee

Report No. 7 of the AGA, as published in 1996

and as such report may hereafter be further

revised or as may be mutually agreed upon by

Connecting Party and Transporter.

conform to generally accepted engineering

practices in the industry or as may be mutually

agreed upon by Connecting Party and Transporter.