Southeast Supply Header, LLC

Original Volume No. 1

 Contents / Previous / Next / Main Tariff Index

 

 

Effective Date: 09/04/2008, Docket: CP07-44-005, Status: Effective

Original Sheet No. 216 Original Sheet No. 216

 

GENERAL TERMS AND CONDITIONS

(CONTINUED)

 

2. MEASUREMENT AND MEASUREMENT EQUIPMENT (continued)

 

2.3 All flow measuring, testing and related equipment shall be of

standard manufacture and type approved by Transporter. If

applicable, Transporter or Shipper may install check measuring

equipment and telemetering equipment, provided that such

equipment shall be so installed as not to interfere with the

operations of the operator. Transporter, or Shipper, in the

presence of the other party, shall have access to measuring

equipment at all reasonable times, but the reading, calibrating,

and adjusting thereof shall be done by the operator of the

facilities. Transporter or Shipper shall have the right to be

present at the time of the installing, reading, cleaning,

changing, repairing, inspecting, testing, calibrating or

adjusting done by the operator of the measuring equipment. The

records from such measuring equipment shall remain the property

of the operator, but upon request the other party may request

records including charts, together with calculations therefrom

for inspection, subject to return within thirty (30) days after

receipt thereof. Reasonable care shall be exercised in the

installation, maintenance and operation of the measuring

equipment so as to avoid any inaccuracy in the determination of

the volume of Gas received and delivered.