Southeast Supply Header, LLC

Original Volume No. 1

 Contents / Previous / Next / Main Tariff Index

Effective Date: 09/04/2008, Docket: CP07-44-005, Status: Effective

Original Sheet No. 214 Original Sheet No. 214

GENERAL TERMS AND CONDITIONS

(CONTINUED)

2. MEASUREMENT AND MEASUREMENT EQUIPMENT (continued)

2.2 (a) The volume of Gas delivered at each Receipt Point and

Delivery Point shall be calculated by means of an

electronic flow computer located at each Receipt Point

or each Delivery Point, in the following manner:

(1) The volume of Gas delivered through an orifice meter

shall be computed in accordance with AGA Report No.

3, properly using all factors set forth therein.

(2) The volume of Gas delivered through a turbine meter

shall be computed in accordance with AGA Report No.

7, properly using all factors set forth therein.

(3) The volume of Gas delivered through an ultrasonic

meter shall be computed in accordance with AGA Report

No. 9, properly using all factors set forth therein.

(4) The volume of Gas delivered through a positive

displacement meter shall be computed by properly

applying, to the volume delivered at flowing Gas

pressures and temperatures, correction factors for

(i) absolute static pressure, (ii) flowing Gas

temperature, and (iii) compressibility ratio.

(b) The volume of Gas delivered shall be computed using the

standards and factors determined as follows:

(1) The unit of volume for the purpose of measurement

shall be one thousand cubic feet of Gas at a

temperature of sixty (60) degrees Fahrenheit and a

pressure of 14.73 pounds per square inch absolute.

For the purpose of pricing hereunder, the Dekatherm

equivalent of such unit of volume shall be determined

by multiplying each such unit of volume by the total

heating value per cubic foot of the Gas Delivered

Hereunder (adjusted to a common temperature and

pressure base) and by dividing the result by one

thousand (1000).