Destin Pipeline Company, L.L.C.

Original Volume No. 1

Effective Date: 09/01/1998, Docket: CP96-655-003, Status: Effective

Original Sheet No. 58 Original Sheet No. 58 : Effective

GENERAL TERMS AND CONDITIONS

(Continued)

Section 5.3(c) (continued)

COMPANY's meters only, except as otherwise specifically

provided to the contrary in this Section. COMPANY shall have

access to such check measuring equipment at all reasonable

hours, but the operation of such check measuring equipment

shall be done only by SHIPPER.

(d) Measurement Inaccuracies Requiring Shipper Action. If

COMPANY determines that the meter station volume readings are

inaccurate due to factors beyond the scope of routine

operations and maintenance, including, but not limited to,

pulsation, COMPANY shall notify SHIPPER of such inaccuracies.

Within thirty (30) days of receipt of such notice from

COMPANY, SHIPPER shall at its own expense make or cause to be

made such modifications to its facilities as are necessary to

remove such inaccuracies. If COMPANY determines that

SHIPPER's modifications have not corrected the measurement

inaccuracies, upon 30 days notice in writing to SHIPPER of

the continuing measurement inaccuracies, COMPANY may suspend

operation of the meter station and refuse to receive gas into

COMPANY's pipeline until the measurement inaccuracies are

corrected or COMPANY may install pulsation dampening

equipment at SHIPPER's sole cost and expense.

(e) Prior Period Adjustments. The deadline for closing

measurement data shall be no later than 5 business days after

the month of flow. Any measurement data or corrections

received by COMPANY (including corrections to allocations)

after it has closed the previous month of flow shall be

handled as a prior period adjustment. COMPANY shall process

late measurement data or corrections of measurement errors

under Section 5.3 (a) or (b) as soon as practicable but no

later than 6 months after the applicable month of flow in